FASTENERS

702 Loop
1/2” wide strip – secure with a single nail or screw. For use with all Class I cables or
secondary bonding wires.
A702 Aluminum
C702 Copper
C702L Lead Coated
Copper

704 Loop
5/8” wide strip – secure with a single nail, screw,
1/4" bolt, or 1/4" drive-in anchor. For use with all cables or secondary bonding wires.
A704 Aluminum
C704 Copper
C704L Lead Coated
Copper

706-707
Protector Pipe Strap
Tinned copper strip with one fastening hole. Used to secure catalog numbers C630, C631,
and P632 protector pipes. C706 fits
pipe up to 3/4" O.D. and C707 fits around 1” O.D PVC.
C706 Tinned copper strap for up to 3/4"
O.D.
C707 Tinned
copper strap for up to 1" O.D.

G708
Wood Protector Strap
Galvanized steel strap used for securing catalog number
P633 wood protector. Provided with
two 5/16” mounting holes.
G708 Galvanized
steel strap

710
Stand-off Cable Holder
Cast aluminum or bronze stand-off cable holder. Use with 3/8” lead expansion anchor.
A710 Aluminum
C710 Bronze

711 Cast
Adhesive Cable Holder
Cast aluminum or bronze adhesive cable holder with bolt
tension cable clip. For use with all
full and secondary cables.
A711 Aluminum
C711 Bronze
C711L Lead Coated
Brass

712
Stamped Adhesive Clip
Three compression type fingers hold the cable securely to
the roof. Middle finger stamped so
the adhesive does not interfere with the anchoring process. For use with all cables and bonding wires.
A712 Aluminum
C712 Brass
C712L Lead Coated
Brass
714 Standing Seam Clip
Cable holder for standing seam has a 3/4" groove to
fit over most seams. Cable holder is
adjustable so cables can run perpendicular or parallel. Single set screw holds clip to seam. Loop and cable anchored to clip using self
tapping screw (catalog number S725) or 1/4" bolt (catalog number S732).
Clip with self tapping screw Clip with 1/4” bolt
A713 Aluminum A714
Aluminum
C713 Bronze C714 Bronze
C713L Lead Coated
Bronze C714L Lead Coated Bronze

Cable to
Pipe Straps
Secures full size cable to pipes. Four sizes are standard but any size can
be fabricated.
A715 Aluminum
-- pipe size 1.900” O.D.
C715 Tin Plated
Copper – pipe size 1.900” O.D.
A716 Aluminum
-- pipe size 2.375” O.D.
C716 Tin Plated
Copper – pipe size 2.375” O.D.
A717 Aluminum
-- pipe size 3.500” O.D.
C717 Tin Plated
Copper – pipe size 3.500” O.D.
A718 Aluminum
-- pipe size 4.500” O.D.
C718 Tin Plated
Copper – pipe size 4.500” O.D.

P720
Rubber Expansion Anchor
P720 1/4” X 1”
Rubber expansion anchor

Stainless
Steel and Copper Nails
C722 2” Copper
Roofing Nail
S722 6d stainless
steel ring shank nail – 2” length
S723 8d stainless
steel ring shank nail – 2-1/2” length

Stainless
Steel Self Drilling Screw
S725 #10 X 1”
self drilling screw
S726 #10 X 1-1/4”
self drilling screw
S727 #10 X 1-1/2”
self drilling screw

P729
Drive-in Anchor
P729 1/4" X
1-1/4” Drive-in anchor

Stainless
Steel Bolts
HEX HEAD BOLTS
S730 1/4" X
1/2" S740 5/16" X 2"
S731 1/4" X
3/4" S741 3/8" X 3/4"
S732 1/4" X
1" S742 3/8" X 1"
S733 1/4" X
1-1/4" S743 3/8" X 1-1/4"
S734 1/4" X
1-1/2"
S735 5/16" X
3/4" S745 3/8" X 2"
S736 5/16" X
7/8" S746 1/2" X1/2"
S737 5/16" X
1"
S738 5/16" X
1-1/4" CARRIAGE
BOLTS
S739 5/16" X
1-1/2" S739CB 5/16" X 1-3/4"

Flat
Washer
Stainless Steel Brass
S750 1/4"
S751 5/16”
S752 3/8”
S753 1/2”
S754 5/8” C754 5/8”

Lock
Washer
Stainless Steel
S755 1/4"
S756 5/16”
S757 3/8”
S758 1/2”

Neoprene
Washer
P760 #10
P761 1/4"
P762 5/16”
P763 3/8”
P764 1/2”

Nut
Stainless Steel Brass
S770 1/4"
S771 5/16”
S772 3/8”
S773 1/2”
S774 5/8” C774 5/8”

SDSA
1175 Arrester
Secondary surge arrester designed to protect against
lightning surge damage. 120/240
VAC. Diagnostic LED light. UL Listed
SDSA 1175 Arrester

Lead
Expansion Anchor
P776 1/4" Lead Expansion Anchor
P778 3/8" Lead Expansion Anchor
P779 1/2" Lead Expansion Anchor

P780
Silicone Sealant
P780 100% silicone rubber sealant – 10 oz
tube.
|