SPLICERS

SPLICERS

301 Tee Splicer

 

Compression type fingers crimp around cable.  Made from 14 gauge copper or 10 gauge aluminum stock.  For use with all main size conductors on Class I structures only.  UL Listed

 

A301        Aluminum

C301        Copper

C301L   Lead Coated Copper

 

303 Straight Splicer

 

Compression type fingers crimp around ends of cable for a straight connection.  Made from 14 gauge copper or 10 gauge aluminum stock.  For use with all main size conductors on Class I structures only.  UL Listed

 

A303       Aluminum

C303        Copper

C303L   Lead Coated Copper

 

305 parallel splicer

 

Compression type fingers crimp around cable.  Made from 14 gauge copper or 10 gauge aluminum stock.  For use with all main size conductors on Class I structures only.  UL Listed

 

A305        Aluminum

C305        Copper

C305L   Lead Coated Copper

 

309 Parallel Splicer

 

Cast parallel splicer with one carriage bolt and 1-1/2” of contact on cables or wires.  Designed so bolt does not come through bottom of splicer and penetrate roof membrane.  May be used with full size cables and secondary bonding wire.  UL Listed

 

A309        Aluminum

C309        Bronze

C309L   Lead Coated Bronze

 

310 Cast Parallel Splicer

 

Parallel cable splicer with single bolt tension and 1-1/2” of contact on cables and wires.  Splicer may be used with full size cables or secondary bonding wire.  UL Listed

 

A310        Aluminum

C310        Bronze

C310L   Lead Coated Bronze

 

C311 Parallel Splicer

 

Parallel cable splicer with double carriage bolt tension and 2” of contact on cable and wires.  Splicer may be used with full size cables or secondary bonding wires.  UL Listed.

 

A311        Aluminum

C311        Bronze

C311L   Lead Coated Bronze

 

312 Parallel Splicer

 

Parallel cable splicer with one carriage bolt.  Splicer may be used with rod, cable, or bonding wire where less contact is acceptable.  UL Listed

 

 

A312        Aluminum

C312        Bronze

C312L   Lead Coated Bronze

 

 

313 Cast Straight Splicer

 

Cast aluminum of brass straight splicer has four bolt cable tension – two per cable.  Splicer used to butt ends of cable in straight line.  UL Listed.

 

A313        Aluminum

C313        Bronze

C313L   Lead Coated Bronze

 

314 Cast Parallel Splicer

 

Cast parallel cable splicer with double bolt tension and 4” of contact on cable or wires.  Splicer may be used with full size cables or secondary bonding wires.  UL Listed

 

A314        Aluminum

C314        Bronze

C314L   Lead Coated Bronze

 

315 Cast Parallel Splicer

 

Cast parallel cable splicer with double bolt tension and 2” of contact on cable or wires.  Splicer may be used with full size cables or secondary bonding wires.  UL Listed

 

A315        Aluminum

C315        Bronze

C315L   Lead Coated Bronze

 

BIMETALLIC SPLICERS

A320 Bimetallic Splicer

 

Bimetallic connector for making connections between aluminum and copper cables in a straight line.  Two-bolt tension on each cable for making a strong connection.  Use with all main size conductors.  UL Listed

 

A320        Aluminum to Copper Bimetallic

 

A322 Bimetallic Splicer

323 Disconnects

Bimetallic connector for making connections between aluminum and copper cables.  Single bolt tension caps allow the cables to come from a variety of directions.  Use with all main size conductors.  Eliminates use of additional splicer.  UL Listed

 

 

A322        Aluminum to Copper Bimetallic

 

Cast aluminum or bronze cable disconnect used for testing system continuity or ground resistance.  Single bolt tension caps allow for easy disconnection.

 

 

A323        Aluminum to Aluminum Disconnect

C323        Copper to Copper Disconnect

 

325 Cast Tee Splicer

 

Tee Splicer has bolt tension for connections will all main size conductors.  UL Listed

 

A325        Aluminum

C325        Bronze

C325L   Lead Coated Bronze

 

327 Cross Run Splicer

 

Cross run cable connector has 1-1/2” of contact with four bolt tension.  For use with all full size cables.  UL Listed.

 

A327        Aluminum

C327        Bronze

C327L   Lead Coated Bronze

 

BONDING CLAMPS, PLATES AND LUGS

404 Cast Bonding Plate

 

Cast aluminum or bronze bonding plate with 3 square inches of contact. Bolt tension cap can be turned so cables can run horizontal or vertical.  For use with all full size cables.  UL Listed.

 

A404        Aluminum

C404        Bronze

C404L   Lead Coated Bronze

 

406 Stamped Bonding Plate

 

Stamped aluminum or copper bonding plate with 8 square inches of contact.  Bolt tension cap provides maximum cable support. For use with all full size cables.  UL Listed.

 

A406        Aluminum

C406        Copper

C406L   Lead Coated Copper

 

BONDING CLAMPS, PLATES AND LUGS

407 Stamped Finger Bonding Plate

 

Stamped aluminum or copper bonding plate with 8 square inches of contact.   Compression type fingers crimp over cable for easy installation.  Available for Class I structures only. For use with all full size cables. 

 

A407        Aluminum

C407        Copper

C407L   Lead Coated Copper

 

410 Cast Bonding Plate

 

Flat metal bonding plates with 8 square inches of contact surface.  Holes provided for 1/4" bolts or smaller screws.  Bolt tension cap can be turned so cables can run any direction.  For use with all full size cables.  UL Listed

 

A410        Aluminum

C410        Bronze

C410L   Lead Coated Bronze

 

411 Cast Bonding Plate

 

Cast aluminum or bronze bonding plate with 8 square inches of contact. Bolt tension cap has 1-1/2” of contact.  For use with all full size cables.  UL Listed.

 

A411        Aluminum

C411        Bronze

C411L   Lead Coated Bronze

 

412 Bonding Lug

 

Bonding lug with 3 square inches of contact surface. Available for bolt sizes 1/4", 3/8”, 1/2", and 5/8” diameter.  Bolt tension cap can turn so cable can be connected from any direction.  For use with all full size cables.  Specify bolt size when ordering.  UL Listed.

 

A412        Aluminum

C412        Bronze

C412L   Lead Coated Bronze

 

414 C-Clamp Bonding Clamp

 

Bonding plate has 8 square inches of surface contact.  C-type clamp allows easy installation on I-beams or other flat areas.  Bolt tension cap has 1-1/2” of cable contact.  For use with all full size cables.  UL Listed

A414   Aluminum

C414   Bronze

C414L  Lead Coated Bronze

416-417 Pipe Clamp

 

Pipe grounding clamp with 1-1/2” of contact.  Available in three pipe sizes.  For use with full size cables.  UL Listed.

Pipe Range .750” to 1.315” O.D.              Pipe Range 1.750” to 2.500” O.D.  

A416        Aluminum                                           A418        Aluminum                       

C416        Bronze                                               C418        Bronze

C416L   Lead Coated Bronze                  C418L   Lead Coated Bronze

 

Pipe Range 1.315” to 1.900” O.D.  

A417        Aluminum

C417        Bronze

C417L   Lead Coated Bronze

 

420 Gutter Clamp

Gutter clamp with compression fingers to crimp over gutter edge and cable.  Use with all full size cables.  Available for Class I structures only.  UL Listed

A420        Aluminum

C420        Copper

C420L   Lead Coated Copper

1” U-Bolt Bonding Clamp                      

2” – 6” U-Bolt Bonding Clamps

                  

Cast aluminum or bronze u-bolt pipe clamps.  Provides 1-1/2” of contact on pipe and cable.  Use with all full size conductors.  Fits pipe sizes 1/2" to 6-3/4”.  UL Listed.

1” U-Bolt fits 1/2" – 1 1/4"  O.D. pipes

A421       Aluminum

C421       Bronze                                                4” U-Bolt fits up to 4-1/2"  O.D. pipes

C421L  Lead Coated Bronze      

                                                                                    A424       Aluminum

2” U-Bolt fits up to 2"  O.D. pipes                        C424       Bronze

                                                                        C424L  Lead Coated Bronze

A422       Aluminum

C422       Bronze

C422L  Lead Coated Bronze                   6” U-Bolt fits up to 6-3/4"  O.D. pipes

 

3” U-Bolt fits up to 3"  O.D. pipes                        A426       Aluminum

A423       Aluminum                                                        C426 Bronze

C423       Bronze                                                            C426L  Lead Coated Bronze

C423L  Lead Coated Bronze

 

430 Secondary Bonding Clamp

 

Cast aluminum or bronze bolt tension secondary bonding lug for connections to VTR’s, roof drains, flashings, etc.  For use with secondary wire.  UL Listed

 

 

A430       Aluminum

C430       Bronze

C430L  Lead Coated Bronze

 

432 Secondary Bonding Lug

 

Terminal bonding lug with 2 bolt tension on secondary wires.  Lug can be secured with a screw, 1/4” drive-in anchor, or 1/4" bolt.  For use with all secondary wires.  UL Listed.

 

A432       Aluminum

C432       Bronze

C432L  Lead Coated Bronze

 

433 Secondary Bonding Lug

 

Cast soft aluminum or bronze secondary terminal bonding lug. Compression type fingers crimp over cable for easy installation.  Lug hole is 1/4".  Use with #6 or #4 miniature solid bonding wire.  For Class I structures only.

 

A433       Aluminum

C433       Bronze

C433L  Lead Coated Bronze

 

434 Secondary Bonding Clamp

 

Cast aluminum or bronze bolt tension bonding clamp secures to I-beams, purlin flange, etc.  For use with all full size cables and secondary wires.  For secondary bond only.  UL Listed

 

 

A434       Aluminum

C434       Bronze

C434L  Lead Coated Bronze

 

 

Flexible Bonding Strap

 

Extra flexible bonding cable for use in moving or vibrating metal objects.  3/4" X 1/8” thick.  Two sizes standard 10” and 12”.  Any size can be fabricated.

 

10” Strap

A435       Aluminum

C435       Tinned Copper

 

12” Strap

A436       Aluminum

C436       Tinned Copper

 

Secondary Bonding Strap

 

1-1/4” wide aluminum or tinned copper strip with a secondary terminal lug (catalog number 432) attached.  Fits all secondary wires.   Any size strap can be fabricated.  UL Listed.

 

A438       Aluminum strap for 2” pipe

C438       Tinned copper strap for 2” pipe

 

A439       Aluminum strap for 4” pipe

C439       Tinned copper strap for 4” pipe

 

Primary Bonding Strap

 

1-1/4” wide aluminum or tinned copper strip with a parallel cable connector (catalog number 310) attached.  Fits all main size cables and secondary wires.   Any size strap can be fabricated.  UL Listed.

 

A442       Aluminum strap for 2” pipe

C442       Tinned copper strap for 2” pipe

 

A444       Aluminum strap for 4” pipe

C444       Tinned copper strap for 4” pipe

 

A446       Aluminum strap for 6” pipe

C446       Tinned copper strap for 6” pipe

 

A448       Aluminum strap for 8” pipe

C448       Tinned copper strap for 8” pipe

 

Primary  Water Pipe Bonding Strap

 

2” wide aluminum or tinned copper strip with a parallel cable connector (catalog number 310) attached.  Fits all main size cables.  Any size strap can be fabricated.  UL Listed.

 

A452       Aluminum strap for 2” pipe

C452       Tinned copper strap for 2” pipe

 

A454       Aluminum strap for 4” pipe

C454       Tinned copper strap for 4” pipe

 

A456       Aluminum strap for 6” pipe

C456       Tinned copper strap for 6” pipe

 

A458       Aluminum strap for 8” pipe

C458       Tinned copper strap for 8” pipe

 

A460       Aluminum strap for 10” pipe

C460       Tinned copper strap for 10” pipe

 

 

 

Contact Us with questions